1. Surgical Base:

1.1 Professional all-carbon fiber electric orthopedic operating table, suitable for trauma surgery, spine surgery, pelvic replacement, cervical traction, lower limb traction, spine 3D and other surgical uses;

1.2 Dual base design, the space below the bed surface is completely open, there is no bed column in the middle to affect the movement and operation of the C-arm and other equipment, especially suitable for spine, trauma, pelvic repair, joint surgery and minimally invasive surgery of the thoracolumbar spine;

1.3 The surgical platform can be moved as a whole, not limited to the use of fixed operating rooms;

2. Operating Table Surface:

2.1 The entire bed surface is made of carbon fiber material, 100% X-ray permeable, and the fluoroscopy image is completely free of artifacts;

2.2 The edges of the bed surface are free of metal slides, screws, and crossbars. The hip and thigh support pads are free of springs and other metal components, meeting the requirements of circular scanning of 3D-C arms and O arms and the special requirements of intraoperative navigation operations;

3. Other Functions:

3.1 The height of the surgical platform can be automatically raised and lowered according to the needs of clinical operation;

3.2 The surgical platform has the function of adjusting the head-high and foot-low position and the head-low and foot-high position;

3.3 The surgical platform has a lateral tilt function on each side, which can be locked to keep the patient at a laterally tilted angle;

3.4 The surgical platform has a backup battery system, which can continue to perform surgical operations in the event of a power failure.

3.5 The bed surface can be manually rotated 360°. After turning over, it can meet the needs of the spine ， cervical spine surgery ， Equipped with a high-strength carbon fiber bed plate, it meets pelvic repair 、 traction and other surgical positional requirements.

3.6 Bed size parameters:

1、 Fully extended length of the machine :≤2800mm ，Shortest length after host storage: ≤1800mm；

2、 Tabletop length: Tabletop ( 1 ) length: ≥2150mm 、Tabletop ( 2 ) length: ≥2150mm；

3、 Tabletop width: Tabletop ( 1 ) width: ≤430mm 、Tabletop ( 2 ) width: ≥550mm；

4、 Electric longitudinal tilt of the table (head tilt / foot tilt): 12 ° ± 2 ° ；

5、 Electric lateral tilt of the table (left tilt / right tilt): 25 ° ± 2 ° ；

6 、Manual rotation angle of the table: 360° ；

7 、Minimum height of the table: ≤610mm；

8 、Maximum height of the table: ≥1260mm；

9 、Operating table load-bearing: ≥250 ㎏；

10 、Femoral traction component parameters:

10.1 、Minimum opening angle of traction bracket: ≤17° ；

10.2 、Maximum opening angle of traction bracket: ≥36° ；

10.3 、Maximum adjustable height of traction bracket: ≥360mm；

11 、Lower limb traction machine parameters:

11.1 、Effective stroke of lower limb traction machine: ≥190mm；

11.2 、Maximum traction force of lower limb traction machine: ≥400N；

11.3 、Adjustable stroke of lower limb traction machine height: ≥300mm

3.7 Electric brake.

3.8 Remote control.

II. Clinical Application Parameters:

1 、It can meet the needs of placement and fixation of different surgical positions such as supine, prone, and lateral positions, meeting the needs of different surgeries such as open and minimally invasive surgeries;

2 、Can achieve C arm, O arm and other intraoperative imaging equipment unobstructed scanning from the head of the bed to the foot of the bed, meeting the requirements of three-dimensional circular scanning imaging of the spine;

3 、Can achieve head-high and foot-low positions, hip flexion and knee flexion 90 degree kneeling position and other positional fixation requirements, meeting the requirements of different positional fixation methods in cervical spine surgery and thoracolumbar surgery in spine surgery;

4 、Can achieve distal traction and other positional fixation requirements, meeting the requirements of different positional fixation methods for femoral and tibial fractures in lower limb trauma surgery;

5 、Can achieve abdominal decompression position fixation requirements to keep the patient's abdomen suspended during posterior spine surgery;

6 、It has the function of intraoperative traction for anterior and posterior cervical spine surgery. Through the base traction channel, combined with the cervical spine traction system, constant force traction is achieved using weights or sandbags. This parameter requires providing equipment operation diagrams for proof;

7 、Has 360 degree upgrade interface for combined anterior and posterior spine surgery modules, which can be equipped with a transmission line table to upgrade the intraoperative turning module to achieve the application of combined anterior and posterior surgery of the cervical, thoracic, and lumbar spine. This parameter requires providing equipment operation diagrams for proof;

8 Features an upgraded interface for lower limb traction, allowing for the addition of a femoral traction system kit to upgrade the lower limb traction module for traction and fixation of the lower limbs during lower limb trauma surgery.

8.1 The lower limb trauma traction module consists of an arc-shaped guide rail, a traction machine, and other accessories. It connects and fixes to the foot-end base. The base has an electrically controlled sensing function that can detect the connection status of the lower limb trauma traction module and automatically maintain the bed surface in a horizontal locked state.

8.2 The front end of the traction machine can freely replace skin traction boots or femoral traction arches as needed to meet the traction requirements of different surgeries.

9 Features a head - Upgraded interface for head and femur double traction surgical module. Can be upgraded with a cervical traction system and femoral traction system kit to add a head - and femur double traction module to meet the needs of spinal scoliosis correction surgery, enabling bidirectional resistance traction of the cervical spine and lower limbs.

10 Features an upgraded interface for lumbar disc surgery support module. Can be upgraded with an arc-shaped surgical frame to add a lumbar disc surgery support module to assist in opening the intervertebral space during intervertebral disc surgery.

11 Features an upgradable interface for arthroscopic surgery support and fixation devices. Can be upgraded with an arthroscopic surgery fixation module to enable traction and fixation of limbs during shoulder, elbow, wrist, knee, and ankle surgeries.

Configuration List:

Orthopedic Imaging Dual-Base Electric Operating Table (Host): 1 Unit

Spinal Tabletop Kit ：1 Set

Cervical Traction Kit ：1 Set

Three-Pin Head Frame ：1 Piece

Arc-Shaped Surgical Frame Kit ：1 Set

X-Ray Translucent Tabletop Kit ：1 Set

Femoral Traction System Kit ：1 Set

Large Accessory Cart ：1 Unit