(I) Introduction

The integrated wet and dry suspension bridge is designed to prevent ground contamination and improve equipment safety in high-cleanliness operating rooms and ICU areas. Gas pipelines, power cords, and equipment such as anesthesia, respiratory, and monitoring instruments can all be lifted off the ground via the suspension tower and can be connected to various pneumatic tools.

The cantilever is made of aluminum alloy using a one-time molding process. It has high load-bearing capacity, is easy to adjust, is safe and reliable, and has various forms of tower body combinations for flexible configuration. It can be adjusted according to the needs of each operating room and ward.

Product advantages include: motor-controlled equipment platform lifting, safe and reliable; balanced design ensures the horizontality of the equipment platform, ensuring equipment safety; motor drive ensures fast and efficient equipment operation; solid design and manufacturing, and composite material surfaces that can be cleaned with standard disinfectants, completely eliminating contamination.

(II) Features

■Cantilever: Rotatable, increasing the equipment's working coverage and improving efficiency; adjustment and use are more convenient. The tower head and load-bearing platform can only hover on the circumference of the cantilever radius, so a single cantilever is only chosen for smaller operating rooms. Rotation angle ≤340°.

■Fixed Cylinder

It is a transition piece connecting the tower head, not only bearing weight but also a key part for flexible rotation. It has very high requirements for anti-deformation ability, and its size is determined by the height of the hospital room and ceiling decoration layer.

■Tower Head

Rotatable, used to install gas interfaces and gas pressure gauges, and has instrument power sockets. It uses special sheet metal materials, with internal and external spray painting to ensure surface corrosion resistance and no deformation under full load.

■IV Pole

Can hang infusion bags (bottles) or infusion pumps.

■Gas Terminals

Provides oxygen, negative pressure suction, compressed air, etc., all imported configurations.

■Multiple Data and Communication Interfaces

Network communication, video data transmission, telephone interface, etc.

■Connecting Column

Connecting piece for the load-bearing platform. Since the platform can be adjusted as needed, the clamping screws will not damage the rust prevention function, and the number of platforms can be increased as required, so medical-grade stainless steel pipes are used.

■Load-bearing Platform:

Standard configuration is two layers, which can be increased. Independent rotation angle ≤340°kg.

Main Technical Parameters and Configuration:

1. Operating power supply: AC220V, 50HZ;

2. Beam length 2800～3000mm (actual size is based on on-site measurement); 2 lighting lamps; 10 power sockets

3. Equipped with a brake device, the equipment has no drift, and can move easily when released;

4. Suspension column-type wet section tower: 1. Configuration as follows:

(1) Standard gas terminal configuration: (2 oxygen, 2 suction, 2 air)

a. Has anti-misconnection function;

b. More than 20,000 plug-in cycles;

c. Uses double sealing, with three states (on, off, pull), can be repaired with gas;

(2) 2 grounding terminals;

(3) 1 stainless steel adjustable IV pole;

(4) 2 stainless steel adjustable injection pump racks; with 8 infusion bottle hooks

(5) 1 storage basket;

(6) Rotatable: 0～340°;

(7) Power interfaces are on both sides of the tower body, and gas sources are distributed on the back of the tower body, fully realizing the separation of electricity and gas to ensure equipment safety.

5. The main material uses high-strength aluminum alloy profiles;

6. Surface treatment uses electrostatic spraying.