Products
Transfer truck JK208-B1
Technical parameters: JK208-B1
The length of the bed board: ≥1900mm
Full width is less than: 0-680mm
Height range: 0-300mm
Back lift: 0～75°
Height lifting: 550～880mm
The lifting of the back plate is controlled by a pneumatic spring: 0-75 degrees, stepless operation
High and low lifting system: a linkage mechanism that can be extended and retracted by a manual adjuster
1. The steel body of the car body is sprayed with plastic, the bed board is made of PP resin material at one time, and the three-stage bed panel frame: the whole frame is made of steel material / part of aluminum material; the bedside guardrail can be fixed horizontally, which is convenient for drip puncture and load-bearing 10Kg.
2. Two-stage pallet: The pallet is divided into two parts of different sizes and depths, with 6 leaking holes, easy to use, and a load of 10kg.
3. Roller: Central lock double-sided wheels, four imported rollers with a diameter of ≥150 mm, and central lock pedals must be installed at the four corners of the cart.
4. Independent central fifth wheel system: It should be equipped with an independent central fifth wheel system, with operating pedals installed on both sides of the cart.
5. Side guards: guards made of PP resin are installed on both sides of the cart, which can be fixed horizontally with safety settings; the side guards are equipped with an angle display, which can display the rising angle of the back plate, and is provided with a recess Shaped groove to prevent the infusion tube from slipping off
6. Transfer mattress: the fabric is waterproof, the side is equipped with zippers, and the outer fabric can be washed, which can effectively eliminate static electricity during the transfer process;
7. Infusion stand jack: There is an infusion stand jack at each of the four corners of the cart, and the infusion stand can be fixed in the jack. Standard infusion stand, with infusion stand storage hole
8. The car adopts the international advanced central control brake system, which is stable and reliable. The car surface is a split structure, and the upper body uses imported steam springs as a supporting force source, which is easy and convenient to operate.
Room 117-118, incubation site of entrepreneurship Park, No. 251 Xuefu Road, Nangang District, Harbin, Heilongjiang Province
QQ ：2804023016
E-mail：marketing@ hrbjkq.com
Scan to see the mobile version
Copyright © HARBIN JINGKEQI TECHNOLOGY CO.,LTD. copyright 黑ICP备14005608号 Powered by：300.cn