Technical parameters: JK208-B1
Bed length: ≥1900mm
Full width less than: 0-680mm
Height adjustment range: 0-300mm
Backrest adjustment: 0～75°
Height adjustment: 550～880mm
Backrest adjustment controlled by pneumatic spring: 0-75 degrees, stepless operation
Height adjustment system: Linkage mechanism extended by manual adjuster
1. The vehicle body is steel with powder coating, the bed board is made of PP resin material by one-time injection molding, three-section bed panel frame: the overall frame is made of steel/part of aluminum material; the bed side guardrail can be fixed horizontally, which is convenient for intravenous puncture, and the load-bearing capacity is 10Kg.
2. Two-section tray: The tray is divided into two parts with different sizes and depths, with 6 drainage holes, easy to use, and a load-bearing capacity of 10kg.
3. Rollers: Central locking double-sided wheels, four imported rollers with a diameter ≥150mm, and central locking pedals must be installed at the four corners of the trolley.
4. Independent central fifth wheel system: An independent central fifth wheel system should be equipped, and operating pedals should be installed on both sides of the trolley.
5. Side guard plates: PP resin guard plates are installed on both sides of the trolley, which can be fixed horizontally and have safety settings; the side guard plates have an angle display to show the angle of the backrest lift, and have a concave groove to prevent the infusion tube from slipping.
6. Transfer mattress: The fabric is waterproof, with zippers on the sides, and the outer fabric is washable, which can effectively eliminate static electricity generated during the transfer process;
7. Infusion stand insertion hole: There is an infusion stand insertion hole at each of the four corners of the trolley, and the infusion stand can be fixed in the insertion hole. Standard infusion stand, with infusion stand storage hole
8. This vehicle uses an internationally advanced central control braking system, which is stable and reliable. The vehicle surface has a split structure, and the upper body uses imported gas springs as the support power source, which is easy and convenient to operate.
